Name: Full Non-woven Flap Disc 7inch
Brand: Wenling Keying Abrasives Co., Ltd.

Full Non-woven Flap Disc 7inch



Engineered for precision surface finishing, this high-performance disc delivers exceptional results on both flat and contoured surfaces. Its advanced features include superior water resistance for wet operations, optimized heat dissipation for extended durability, anti-clogging design maintains consistent performance.

 Contact us

Call us +8615067699991

Table of Full Non-woven Flap Disc 7inch

Full Non-woven Flap Disc 7inch Non-woven Flap Disc (Full) Size Table

Full Non-woven Flap Disc 7inch Specification:

Diameter: 7 inch=180mm
Max. RPM: 13300 RPM
Raw Materials: Aluminum Oxide(AO), Silicon Carbide(SC)
Grit Size: Coarse-60#/80#, Medium-100#/120#, Fine-150#/180#, Very Fine-240#/320#, Ultra Fine-400#/600#, Micro Fine-800#/1000#
Shank Diameter: 3mm, 6mm, 3.175mm, 6.35mm (Other sizes can be customized)

Full Non-woven Flap Disc 7inch Materials that can be worked:

Aluminum
Cobalt-based alloys
Other non-ferrous metals
High-temperature-resistant materials
Nickel-based alloys (e. g. Inconel and Hastelloy)
Bronze
Hard non-ferrous metal
Titanium
Titanium alloys
Copper
Soft non-ferrous metal
Brass
Zinc
Stainless steel (INOX)
Thermoplastics
Fiber-reinforced duroplastics (GRP, CRP)
Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
Steel, cast steel

Full Non-woven Flap Disc 7inch Applicable Industries

Applications

Roughening
Deburring
Surface work
Cleaning
Structuring (matt finishing, brush matting and satin finishing)
Fine grinding in multiple steps

Full Non-woven Flap Disc 7inch Applicable Industries

Safety Warning of Full Non-woven Flap Disc 7inch

Instructions:

Safety Warning of Full Non-woven Flap Disc 7inch

Please try to choose an operation indoor environment and wear protective guards and goggles.
Never exceed the recommended maximum permitted rotational speed for safety reasons.
In order to have a good stock removal rate, quality of surface, and thermal loading on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to different grit flap wheels.

Safety Warning:

The clamping length between shank and grinders should be more than 15mm.

Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.