



  qrcode qrcode1

   

+86(0)576-86711667 | info@kytools.cn

Mounted Flap Wheels Micro-Mini Unmounted Flap Wheel Non-woven Polishing Range Mounted Point Sanding Cartridge Rolls Range Strip & Clean Removers Wool Polishing and Finishing Polishing and Grinding Discs Unmounted Flap Wheels Sandpaper Disc Other Abrasive Tools Fine Polishing and Finishing Corse Grinding Matt Finishing Mirror Finishing

Standard Mounted Flap Wheel Flap Wheel (Special Shape) Flap Wheel (Arbor Hole) Flap Wheel Drum Flap Wheel M8 Flap Wheel M10 Flap Wheel M14 Flap Wheel (Slashed) View More

Spiral Band Holder

KEYING Rubber drum holders is matched with spiral band sizes, well-suited to the cooperating speed and contact pressure with the abrasive spiral bands. Bulk buy more custom selection of abrasive products from Keying abrasive tools factory.

Raw Material

Rubber drum holders

Max. RPM

5000~55000 RPM

Types Of Spiral Band Holders

By Shape

By Material

By Size

Working Principle of Spiral Band Holders

Reducing wear and thermal load of the workpiece can be achieved by reducing contact pressure and speed (abrasive paste/oil can be used when appropriate)
In order to avoid unnecessary tool wear and thermal load, choose to switch to coarser-grit abrasive clothes instead of increasing contact pressure to increase cutting force
increasing the cutting speed achieves a slightly finer surface.
Increasing the contact pressure makes the surface slightly more coarse and if you use the same grit size on soft or hard material the surface finish will look coarse on the softer material.
With high elasticity, good synchronous consumption, suitable for a variety of planes, curved surfaces, and corner polishing