You are in our Global Site
Keying Abrasives Flap Discs are designed for professional surface conditioning requirements with many possibilities for 2 flap disc use: grinding, polishing, smoothing and finish grinding.
What is grain AO?
-It is the single crystal that dulls during processing, with a good initial cut rate.
-Hard and durable grain
-Universal application purpose
|Backing||Self-adhensive||Origin||Made In China||Grain Type||Aluminia Oxide/Silicon Carbide/Zirconia/Ceramic|
|Maximum RPM||7600||Minimium Order Quantity||10000pcs||Compatible Tool|
Flexible Shaft Drives
Cordless Angle Grinders
|Hole Pattern||No Holes||Standard Of Packing||100pcs|
The effect is excellent in the fine finishing
Waterproof-can be used both wet or dry
Cool polishing, minimizing smearing and discoloration of the surface.
Resist loading and rusting
*Light deburring with low noise
Safe and comfortable to use
Conformability to irregular surface
Step-by-step fine grinding
Please try to choose operation indoors environment and wear protective guards and goggles.
Never to exceed the recommanded maximum permitted rotational speed for safety reasons.
In order to have a gppd syocl removal rate, quality of surface and thermal laoding on the workpiece, the best performace would with a recomended cutting speed at 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.
The clamping lenght between shank and grinders should be more than 15mm.
Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.
Introduction to the Characteristics and Advantages of Non-woven Flap Wheel Drum
Choosing the Right Abrasive for Automotive Industry Grinding Applications
Factors Influencing the Performance of Flap Discs