



  qrcode qrcode1

   

+86(0)576-86711667 | info@kytools.cn

Mounted Flap Wheels Micro-Mini Unmounted Flap Wheel Non-woven Polishing Range Mounted Point Sanding Cartridge Rolls Range Strip & Clean Removers Wool Polishing and Finishing Polishing and Grinding Discs Unmounted Flap Wheels Sandpaper Disc Other Abrasive Tools Fine Polishing and Finishing Corse Grinding Matt Finishing Mirror Finishing

Standard Mounted Flap Wheel Flap Wheel (Special Shape) Flap Wheel (Arbor Hole) Flap Wheel Drum Flap Wheel M8 Flap Wheel M10 Flap Wheel M14 Flap Wheel (Slashed) View More

Size :4 1/2 Inch （115mm）

Keying 4 1/2 inch Abrasive discs including Rust & Striper Disc, Roloc Surface Condition Disc Disc, Self-adhesive Disc, Flap Disc, Fibre Disc, Velcro-backed abrasive disc.

What tools can 4 1/2 Inch abraisve discs usually apply with?

-Backing pads

Types Of 4 1/2 Inch Abrasive Discs

4 1/2 Paint And Striper With Fibre Backing

KEYING Paint Striper Disc With Fibre Backing 4-1/2inch can remove general coating and polishing surface, can be used on stainless steel, mild steel, aluminum, plastic, cement, wood and stone surface. ...

4 1/2 Inch Roloc Surface Condition Disc Disc

KEYING manufactures Surface Condition Material (SCM), our production is about reprocessing jumbo rolls of SCM, then finally changing into unique smaller sizes SCM grinding and polishing tools. They ar...

4 1/2 Self-adhesive Disc

KEYING manufactures Self-adhesive Disc,our production is about reprocessing jumbo rolls of SCM, then finally changing into unique smaller sizes SCM grinding and polishing tools.They are adaptable to c...

4 1/2 Flap Disc

Keying 4 1/2 inch Abrasive discs inluding Rust & Striper Disc, Roloc Surface Condition Disc Disc, Self-adhesive Disc, Flap Disc, Fibre Disc, Velcro Abraisve DISC.What tools can 4 1/2 Inch abraisv...

4 1/2 Fibre Disc

KEYING fiber discs are offered in various types to meet different application needs.2 different materials: Silicon Carbide, Aluminum OxideGenerally from 16 grit to 120 gritFrom 100mm diameter to 230mm...

4 1/2 Velcro-backed Abrasive Disc

Working Principle

Reducing wear and thermal load of the workpiece can be achieved by reducing contact pressure and speed (abrasive paste/oil can be used when appropriate)
In order to avoid unnecessary tool wear and thermal load, choose to switch to coarse-grit abrasive clothes instead of increasing contact pressure to increase cutting force
Increasing the cutting speed achieves a slightly finer surface.
Increasing the contact pressure makes the surface slightly more coarse and if you use the same grit size on soft or hard material the surface finish will look coarse on the softer material.