You are in our Global Site

CLOSE

Search
×

Paint Stripe Disc With Central Hole 3 Inch

paint stripe disc with central hole 3 inch

Paint Stripe Disc With Central Hole 3 inch is used for coarse cleaning work such as removing paint, scale, heat discoloration, rust, and adhesive residues in peripheral grinding.

KEYING Striper Discs exhibit a higher stock removal rate with a very long tool life.

Specifications of Paint Stripe Disc With Central Hole 3 inch

Size3" (75mm)BrandKeyingCodeHGHG02210013+Grit+S
BackingNoOriginMade in ChinaGrain TypeAluminia Oxide/Silicon Carbide
Maximum RPM10000Minimium Order Quantity10000pcsCompatible ToolFlexible Shaft Drives
Straight Grinders
Angle Grinders
Cordless Angle Grinders
Hole PatternOne HoleStandard Of Packing10pcs


Table of Paint Stripe Disc With Central Hole 3 inch

Table of Paint Stripe Disc With Central Hole 3 inch


Features of Paint Stripe Disc With Central Hole 3 inch

  • Grinding disc removes rust, scale, and old paint from metal

  • Multi-use abrasive works on metal, wood, fiberboard and plastics

  • Flexible non-woven nylon fiber disc will not rust or splinter

  • Coarse silicon carbide abrasive cuts fast to save time

Paint Stripe Disc With Central Hole 3 Inch Applicable Industries

Applications

  • Removal of rust, corrosion stains, scale, dirt, paints.

  • Cleaning of weld seams

  • Removal of slight drawing marks and heat discolorations

  • Cleaning of surfaces of diverse characteristics

  • Clean Stainless steel surface in preparation of adhesive bonding or application of fillers.

Paint Stripe Disc With Central Hole 3 Inch Applicable Industries

Recommendations for Use:

  • Preferably for use on slow-running angle grinders.

  • For the best results, use at a recommended cutting speed of 30–35 m/s.

Paint Stripe Disc With Central Hole 3 Inch Applicable Industries

Matching Tool Drives:

  • Flexible shaft drive

  • Power drill

  • Straight grinder

Paint Stripe Disc With Central Hole 3 Inch Applicable Industries

Safety Instructions of Paint Stripe Disc With Central Hole 3 Inch

How To Paint Stripe Disc With Central Hole 3 Inch

Instructions:

Safety Instructions of Paint Stripe Disc With Central Hole 3 Inch



Safety Warning:

The clamping lenght between shank and grinders should be more than 15mm.

Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.

If you have any questions, please contact us immediately
Contact Keying Abrasives Now
Other Paint Stripe Disc With Central Hole Products
Paint Stripe Disc With Central Hole 4 Inch
Paint Stripe Disc With Central Hole 4 Inch
Paint Stripe Disc With Central Hole 6 Inch
Paint Stripe Disc With Central Hole 6 Inch
Keying Paint Stripe Disc With Central Hole
Keying Paint Stripe Disc With Central Hole
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Visit our cookie policy to learn more.
Reject Accept