This M8 arbor Mounted Flap Wheel, and can adopt with M8 x 1.25 Thread Adapter Pin. Can apply with angle grinder to lock mounted flap wheel on. . The grinder is attached to the flap wheel with the threaded port where the handle is usually secured, such as M8 Straight Hole, M8 with Shank clocker and M8 Screw Hole. The 8 in M8 means the middle aperture is 8mm, and the middle of the page turning mounted flap wheels adopts imported high-quality special glue.
Grit Size
40#, 60#, 80#, 100#, 120#, 150#, 180#, 240#, 320#, 400#, 600# (dimensions smaller then 15mm starts with 80#)
Raw Material
Coated Abrasive Clothes, Silicon Carbide, Aluminium Oxide, and Ceramic combined, Zirconia, etc, with different brands, e.g. Klingspor, Sait, Deerfos, NCA, 3M, etc)
Reducing wear and thermal load of the workpiece can be achieved by reducing contact pressure and speed (abrasive paste/oil can be used when appropriate)
In order to avoid unnecessary tool wear and thermal load,choose to switch to coarser-grit abrasive clothes instead of increasing contact pressure to increase cutting force
Increasing the cutting speed achieves a slightly finer surface.
Increasing the contact pressure makes the surface slightly more coarse and if you use the same grit size on soft or hard material the surface finish will look coarse on the softer material.
With high elasticity, good synchronous consumption, suitable for a variety of plane,curved surface and corner polishing.
Keying Abrasives in 2023 Zhengzhou International A&G EXPO
Find more
Keying Abrasive Flap Wheel Warranty and Guarantee
Find more
Scope Industry Application of Keying Abrasives Flap Wheel
Find more
Find more
Keying Abrasives
High-quality abrasive products, customized solutions for your needs!
Contact us
Telephone
+86(0)576-86711667
address
No. 7 Songshan Road, Wenxi Industrial District, Wenling City, Zhejiang Province, China
English 
日本語 
한국어 
français 
Español 
italiano 
português 
العربية 
Türkçe 
беларускі 
Indonesia 
