These Surface Conditioning Discs are smaller discs that have a plastic threaded button or screw designed to easily and quickly screw onto a Roloc disc pad so that you can conveniently change discs with a simple twist-off, twist-on motion. Our non-woven fiber construction conforms well to help preserve irregular or contoured surfaces and the Roloc backing supports the disc for aggressive cutting.
Type: Surface Conditioning Disc
Max. RPM: 5000~19000 RPM
Outer Diameter: 20mm/25mm/38mm/50mm/75mm
Raw Materials: Aluminum Oxide(AO), Silicon Carbide(SC)
Grit Size: Extra Coarse-46#, Coarse-60#/80#, Medium-100#/120#, Fine-150#/180#, Very Fine-240#/320#, Ultra Fine-400#/600#
Please try to choose an operation indoor environment and wear protective guards and goggles.
Never exceed the recommended maximum permitted rotational speed for safety reasons.
In order to have a good stock removal rate, quality of surface, and thermal loading on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to different grit flap wheels.
The clamping length between shank and grinders should be more than 15mm.
Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.
Revolutionizing Metal Work: Flap Disc Polishing Techniques Unveiled
Find more
Flap Disc Polishing Unleashed: Transforming Metal Surfaces in Automotive Restoration
Find more
Introduction to the Characteristics and Advantages of Non-woven Flap Wheel Drum
Find more
Find more