CLOSE

Search
×

5 Inch (125mm) Abrasive Disc

5 inch 125mm abrasive disc

KEYING manufactures Roloc Abrasive Disc, our production is about reprocessing jumbo rolls of SCM, then finally changing into unique smaller sizes SCM grinding and polishing tools. They are adaptable to contours; the performance capacity is good and steady.

Specifications of 5 Inch (125mm) Abrasive Disc

Size5" (125mm)BrandKeyingCodeSDS67+5"+Grit+AO
BackingFibre DiscOriginMade in ChinaGrain TypeAluminia Oxide/Silicon Carbide/zirconia/Ceramic
Maximum RPM4600-5300Minimum Order Quantity1000pcsCompatible Tool

Flexible Shaft Drives

Straight Grinders

Angle Grinders

Cordless Angle Grinders

Hole PatternNo holesStandard of Packing25pcs


Features  of 5 Inch (125mm) Abrasive Disc

  • Excellent and consistent finish over a long period of time

  • Suitable for general use in dry and wet sanding applications

  • Low-stretch belt

  • More durable so more resistant on edges

  • Much less smearing tendency than existing products; especially at the edge of the disc when working at a tight angle


Advantages

"Excellent performance on hard materials.

More durable so more resistant on edges.

Considerably more resistant to smearing than existing products

Excellent and consistent finish over a long period of time

Suitable for general use in dry and wet sanding applications

Low-stretch belt"

5 Inch (125mm) Abrasive Disc Applicable Industries

Applications

  • Removal of rust, corrosion stains, scale, dirt, and paints.

  • Cleaning of weld seams

  • Removal of slight drawing marks and heat discolorations

  • Cleaning of surfaces of diverse characteristics

  • Clean Stainless steel surface in preparation of adhesive bonding or application of fillers. 

5 Inch (125mm) Abrasive Disc Applicable Industries

Recommendations For Use

  • Preferably for use on slow-running angle grinders.

  • For the best results, use at a recommended cutting speed of 30–35 m/s.

5 Inch (125mm) Abrasive Disc Applicable Industries

Matching Tool Drives

  • Flexible shaft drive

  • Power drill

  • Straight grinder

Question: Why is black cheaper?

Answer: Because the commonly used material is black, blue and purple are more wear-resistant, and the material cost is different

5 Inch (125mm) Abrasive Disc Applicable Industries

Safety Instructions of 5 Inch (125mm) Abrasive Disc

Instructions:

safety-instructions-of-5-inch-125mm-abrasive-disc.png

1. Please try to choose an operation indoor environment and wear protective guards and goggles.

2. Never exceed the recommended maximum permitted rotational speed for safety reasons.

3. In order to have a good stock removal rate, quality of surface, and thermal laoding on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s.

4. Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.


Safety Warning:

1. The clamping length between shank and grinders should be more than 15mm.

2. Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.

If you have any questions, please contact us immediately
Contact Keying Abrasives Now
Other Size :5 Inch (125mm) Products
5 Inch (125mm) Flap Disc
5 Inch (125mm) Flap Disc
5 Inch (125mm) Fibre Disc
5 Inch (125mm) Fibre Disc
5 Inch (125mm) Paint & Striper with Fibre Backing
5 Inch (125mm) Paint & Striper with Fibre Backing
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Visit our cookie policy to learn more.
Reject Accept