You are in our Global Site
The model of this non-standard customized Flap Wheel with Shank is M10, the specification is 10mm Shank diameter, and the middle of the page wheel adopts imported high-quality special glue. Due to the different use and particularity of the workpiece in industrial processing, the conventional type of Flap wheel with Shank cannot be satisfied, so we support sample processing and map processing. In order to improve the application ability of the Mounted Flap wheel in processing, customized for customers.
Max. RPM: 25000 RPM
Shank Diameter: 10mm
Raw Materials: Aluminum Oxide(AO), Silicon Carbide(SC), Zirconia(ZR), Ceramic Aluminum Oxide Combined (CAO)
Grit Size: 60#~600#
Flap wheels with Shank is suitable for grinding small area, dead angle, inner hole surface and slit gaps that difficult to reach. The Features of the abrasive clothes are various with multipurpose application capacity. It is flexible and rich in tensile strength. It could remove the burr and uneven, rough surface with fast grinding force effeciently, meanwhile, can make sure the performance result achieve a slightly finer surface. It is a good product for pre-painting or mirror finishing preparation procedure.
High flexibility to optimium adapation to countours
Steadly high stock removal through the entire tool life and aggressive coated abrasive resin is freed up constantly
The design of opening spaces and flat bonded make the abrasive tools can process as face-down position, so can touch closely to the edges and corners.
■ Chemical processing industries
■ Tool and mold processing
■ Shipping Building
■ Automotive industry
■ Aerospace, gas turbine treatment and repair
■ Machine engineering
■ Deburring and Welding grinding
■ Structuring Surfaces
■ Step-by-step fine grinding
Please try to choose an operation indoor environment and wear protective guards and goggles.
Never exceed the recommended maximum permitted rotational speed for safety reasons.
In order to have a good stock removal rate, quality of surface, and thermal loading on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to different grit flap wheels.
The clamping length between shank and grinders should be more than 15mm.
Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.
Revolutionizing Metal Work: Flap Disc Polishing Techniques Unveiled
Flap Disc Polishing Unleashed: Transforming Metal Surfaces in Automotive Restoration
Introduction to the Characteristics and Advantages of Non-woven Flap Wheel Drum