You are in our Global Site
Structuring (matt finishing, brush matting, and satin finishing)
Fine grinding in multiple steps
Max. RPM: 6120~76300 RPM
Other Raw Materials: Aluminum Oxide(AO), Silicon Carbide(SC), Ceramic Aluminum Oxide Combined (CAO)
Grit Size(Zicornia): 80#/120#
Other non-ferrous metals
Hard non-ferrous metal
Soft non-ferrous metal
Stainless steel (INOX)
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Annealed cast iron
Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
Steel materials with hardness over 54 HRC
Steel, cast steel
Flap wheels with Shank are suitable for grinding small areas, dead angles, inner hole surfaces, and slit gaps that are difficult to reach. The Features of the abrasive clothes are various with multipurpose application capacity. It is flexible and rich in tensile strength. It could remove the burr and uneven, rough surface with fast grinding force efficiently, meanwhile, can make sure the performance result achieves a slightly finer surface. It is a good product for pre-painting or mirror finishing preparation procedures.
High flexibility to optimum adaptation to contours
Steadily high stock removal through the entire tool life and aggressive coated abrasive resin is freed up constantly
The design of opening spaces and flat bonded make the abrasive tools can process a face-down position, so can touch closely to the edges and corners.
■ Chemical processing industries
■Tool and mold processing
■ Automotive industry
■ Aerospace, gas turbine treatment and repair
■ Machine engineering
Deburring and Welding grinding
Step-by-step fine grinding
Please try to choose an operation indoor environment and wear protective guards and goggles.
Never exceed the recommended maximum permitted rotational speed for safety reasons.
In order to have a good stock removal rate, quality of surface, and thermal loading on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to different grit flap wheels.
The clamping length between shank and grinders should be more than 15mm.
Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.
Revolutionizing Metal Work: Flap Disc Polishing Techniques Unveiled
Flap Disc Polishing Unleashed: Transforming Metal Surfaces in Automotive Restoration
Introduction to the Characteristics and Advantages of Non-woven Flap Wheel Drum