KEYING manufactures Self-adhesive discs, our production is about reprocessing jumbo rolls of SCM, then finally changing into unique smaller sizes SCM grinding and polishing tools. They are adaptable to contours; the performance capacity is good and steady.
Size | 5" (125mm) | Brand | Keying | Code | |
Backing | Self-adhesive | Origin | Made In China | Grain Type | Aluminia Oxide/Silicon Carbide/Zirconia/Ceramic |
Maximum RPM | 3800 | Minimum Order Quantity | 10000pcs | Compatible Tool | Pad Sanders/ Sanders |
Hole Pattern | No Holes | Standard Of Packing | 50pcs |
Excellent and consistent finish over a long period of time
Suitable for general use in dry and wet sanding applications
Low-stretch belt
More durable so more resistant on edges
Much less smearing tendency than existing products; especially at the edge of the disc when working at tight angle
"Excellent performance on hard materials.
More durable so more resistant on edges.
Considerably more resistant to smearing than existing products
Excellent and consistent finish over a long period of time
Suitable for general use in dry and wet sanding applications
Low-stretch belt"
Removal of rust, corrosion stains, scale, dirt, and paints.
Cleaning of weld seams
Removal of slight drawing marks and heat discolorations
Cleaning of surfaces of diverse characteristics
Clean Stainless steel surface in preparation of adhesive bonding or application of fillers.
Preferably for use on slow-running angle grinders.
For the best results, use at a recommended cutting speed of 30–35 m/s.
Flexible shaft drive
Power drill
Straight grinder
Question: Why is black cheaper?
Answer: Because the commonly used material is black, blue and purple are more wear-resistant, and the material cost is different
1. Please try to choose an operation indoor environment and wear protective guards and goggles.
2. Never exceed the recommended maximum permitted rotational speed for safety reasons.
3. In order to have a good stock removal rate, quality of surface, and thermal laoding on the workpiece, the best performance would be with a recommended cutting speed at 15-20m/s.
4. Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.
The clamping length between shank and grinders should be more than 15mm.
Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.
「INVITATION」KEYING ABRASIVES invites you to meet in 2024 China International Hardware Show
Find more
Keying Abrasives in 2023 Zhengzhou International A&G EXPO
Find more
Keying Abrasive Flap Wheel Warranty and Guarantee
Find more
Find more