Name: Quick Change Paint Striper 3 Inch
Brand: Wenling Keying Abrasives Co., Ltd.

Quick Change Paint Striper 3 Inch

The non-woven cleaning material of Quick Change Paint Striper 3 inch is glued onto a glass-fabric base. This makes KEYING Strip Discs suitable for use in face-down grinding. For coarse cleaning work such as removing paint, scale, heat discoloration, rust and adhesive residues.

 Contact us

Call us +86(0)576-86711667

Specifications of Quick Change Paint Striper 3 inch

Size	3" (75mm)	Brand	Keying	Code	HFSHFS100275+Grit+S
Backing	Roloc	Origin	Made In China	Grain Type	Aluminia Oxide/Silicon Carbide/ Zirconia/Ceramic
Maximum RPM	5000	Minimium Order Quantity	10000pcs	Compatible Tool	Flexible Shaft drives Straight Grinders Angle Grinders Cordless Angle Grinders
Hole Pattern	No Holes	Standard Of Packing	50pcs

Table of Quick Change Paint Striper 3 inch

Features of Quick Change Paint Striper 3 inch

Grinding disc removes rust, scale, and old paint from metal
Multi-use abrasive works on metal, wood, fiberboard and plastics
Flexible non-woven nylon fiber disc will not rust or splinter
Coarse silicon carbide abrasive cuts fast to save time

Quick Change Paint Striper 3 Inch Applicable Industries

Applications

Removal of rust, corrosion stains, scale, dirt, paints.
Cleaning of weld seams
Removal of slight drawing marks and heat discolorations
Cleaning of surfaces of diverse characteristics
Clean Stainless steel surface in preparation of adhesive bonding or application of fillers.

Quick Change Paint Striper 3 Inch Applicable Industries

Recommendations for Use:

Preferably for use on slow-running angle grinders.
For the best results, use at a recommended cutting speed of 30–35 m/s.

Matching Tool Drives:

Flexible shaft drive
Power drill
Straight grinder

Safety Instructions of Quick Change Paint Striper 3 Inch

How To Quick Change Paint Striper 3 Inch

Instructions:

Safety Instructions of Quick Change Paint Striper 3 Inch

Please try to choose operation indoors environment and wear protective guards and goggles.
Never to exceed the recommanded maximum permitted rotational speed for safety reasons.
In order to have a gppd syocl removal rate, quality of surface and thermal laoding on the workpiece, the best performace would with a recomended cutting speed at 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.

Safety Warning:

The clamping lenght between shank and grinders should be more than 15mm.

Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.