For general grinding of parts made of aluminum, copper, bronze, titanium, and fiber-reinforced plastics.
Especially recommended for titanium alloys.
It is very suitable for the aviation industry, especially since silicon carbide is the only approved abrasive, such as engine components.
Application | ·Removal of rust ·Weld preparation ·Removing discoloration ·Sanding down ·Surface finishing ·Deburring ·Smoothing and blending of flaws | Brand | KEYING | Commodity Code | FSFS361+Flat+4"+Grit+SC |
Compatible Tool | Angle grinder | Country of Origin | China | Raw Material | Silicon Carbide |
Backing | Fiber | For Use On | Glass, Stone, Concrete, Granite, Marble, Ceramic, Rubber, Plastic, Fiberglass | Grit Size | 16#, 24#, 36#, 40#, 50#, 60#, 80#, 100#, 120# |
Diameter Metric | 4"/4.5"/5"/6''/7'' | Industries | Automobile manufacturing, construction, light industry, shipbuilding, machinery manufacturing | Hole Diameter | 16mm/22mm |
Maximum RPM | 8500-15300 | Type of hole | 4 Slotted, 8 Slotted, 6Slitted, Flat | Standard Pack Quantity | 25pcs |
Max. RPM: 6120~76300 RPM
Other Raw Materials: Aluminum Oxide(AO), Zirconia(ZR), Ceramic Aluminum Oxide Combined (CAO)
Grit Size(Silicon Carbide): 120#/180#/240#/320#/400#/600#/800#/1200#/1500#/2000#
Aluminium
Bronze
Stone
Titanium
Titanium alloys
Thermoplastics
Stainless steel (INOX)
Other non-ferrous metals
Hard non-ferrous metal
Fiber-reinforced duroplastics (GRP, CRP)
■ Chemical processing industries
■ Building
■ Steelworks
■Tool and mould processing
■ Pipeline
■Shipping Building
■ Automotive industry
■ Aerospace, gas turbine treatment and repair
■ Machine engineering
Levelling
Deburring and Welding grinding
Structuring Surfaces
Step-by-step fine grinding
Please try to choose to operate indoors environment and wear protective guards and goggles.
Never exceed the recommended maximum permitted rotational speed for safety reasons.
In order to have a good stock removal rate, quality of surface, and thermal laoding on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.
The clamping length between shank and grinders should be more than 15mm.
Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.
Revolutionizing Metal Work: Flap Disc Polishing Techniques Unveiled
Find more
Flap Disc Polishing Unleashed: Transforming Metal Surfaces in Automotive Restoration
Find more
Introduction to the Characteristics and Advantages of Non-woven Flap Wheel Drum
Find more
Find more