You are in our Global Site

CLOSE

Search
×

Silicon Carbide Paint Paint Stripe Disc With Central Hole (SC)

silicon carbide paint paint stripe disc with central hole sc

For general grinding of parts made of aluminum, copper, bronze, titanium and fiber reinforced plastics.

Especially recommended for titanium alloys.

It is very suitable for the aviation industry, especially silicon carbide is the only approved abrasive, such as engine components.

Silicon Carbide Paint Paint Stripe Disc With Central Hole (SC) Grit Size Table Corresponding To Raw Materials

Silicon Carbide Paint Paint Stripe Disc With Central Hole (SC) Grit Size Table Corresponding To Raw Materials


Silicon Carbide Paint Paint Stripe Disc With Central Hole (SC) Specification:

  • Max. RPM: 7000~10000 RPM

  • Outer Diameter: 100mm/115mm/125mm/150mm/180mm

  • Center Hole Diameter: 16mm/22mm

  • Other Raw Materials: Aluminum Oxide(AO)


Silicon Carbide Paint Paint Stripe Disc With Central Hole (SC) Materials that can be worked:

  • Aluminium

  • Cobalt-based alloys

  • Other non-ferrous metals

  • High-temperature-resistant materials

  • Nickel-based alloys (e. g. Inconel and Hastelloy)

  • Bronze

  • Hard non-ferrous metal

  • Titanium

  • Titanium alloys

  • Copper

  • Soft non-ferrous metal

  • Brass

  • Zinc

  • Stainless steel (INOX)

  • Grey/nodular cast iron (GG/GJL, GGG/GJS)

  • Annealed cast iron

  • Thermoplastics

  • Elastomers

  • Fiber-reinforced duroplastics (GRP, CRP)

  • Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)

  • Steel, cast steel

Silicon Carbide Paint Paint Stripe Disc With Central Hole (SC) Applicable Industries

Applications

  • Surface work

  • Roughening

  • Cleaning

Silicon Carbide Paint Paint Stripe Disc With Central Hole (SC) Applicable Industries

Safety Warning of Silicon Carbide Paint Paint Stripe Disc With Central Hole (SC)

Instructions: 

Safety Warning of Silicon Carbide Paint Paint Stripe Disc With Central Hole (SC)


Safety Warning:

The clamping length between shank and grinders should be more than 15mm. 

Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use. 

If you have any questions, please contact us immediately
Contact Keying Abrasives Now
Other Paint Stripe Disc With Central Hole Products
Keying Paint Stripe Disc With Central Hole
Keying Paint Stripe Disc With Central Hole
Paint Stripe Disc With Central Hole 3 Inch
Paint Stripe Disc With Central Hole 3 Inch
Aluminium Oxide Paint Paint Stripe Disc With Central Hole (AO)
Aluminium Oxide Paint Paint Stripe Disc With Central Hole (AO)
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Visit our cookie policy to learn more.
Reject Accept