Name: Aluminum Oxide Cartridge Rolls (AO)
Brand: Wenling Keying Abrasives Co., Ltd.

Aluminum Oxide Cartridge Rolls (AO)



Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut-rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications.

 Contact us

Call us +86(0)576-86711667

Aluminum Oxide Cartridge Rolls (AO) Grit Size Table Corresponding To Raw Materials

Aluminum Oxide Cartridge Rolls (AO) Cartridge Rolls Size Table

Aluminum Oxide Cartridge Rolls (AO) Specification:

Max. RPM:12000~25000 RPM
Other Raw Materials: Zirconia(Z)
Grit Size (Aluminum Oxide): 40#/60#/80#/100#/120#/150#/180#/240#/320#/400#/600#

Aluminum Oxide Cartridge Rolls (AO) Materials that can be worked:

Titanium
Other non-ferrous metals
Hard non-ferrous metal
Copper
Soft non-ferrous metal
Brass
Stainless steel (INOX)
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Annealed cast iron
Thermoplastics
Fiber-reinforced duroplastics (GRP, CRP)
Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
Steel, cast steel

Aluminum Oxide Cartridge Rolls (AO) Applicable Industries

Applications

Leveling
Deburring
Work on edges
Sharpening
Weld dressing
Fine grinding in multiple steps

Aluminum Oxide Cartridge Rolls (AO) Applicable Industries

Safety Warning of Aluminum Oxide Cartridge Rolls (AO)

Instructions:

Safety Warning of Aluminum Oxide Cartridge Rolls (AO)

Please try to choose an operation indoor environment and wear protective guards and goggles.
Never exceed the recommended maximum permitted rotational speed for safety reasons.
In order to have a good stock removal rate, quality of surface, and thermal loading on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to different grit flap wheels.

Safety Warning:

The clamping length between shank and grinders should be more than 15mm.

Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.