KEYING Mounted Head is made of imported raw materials and special equipment with automatic production and excellent quality. These products are designed to meet the needs of individual grinding tool applications and come in a wide range of particle types, granularity, hardness levels, and shapes. To select the correct installation point, consideration must be given to the material, main application area, and specific operational requirements. We will explain to you the appropriate materials for the different types (abrasives and binders) and the task at hand.
Application | Widely Used In Non-Ferrous Metal Materials (Copper, Aluminum) Gray Cast Iron Workpiaece, Glass, Ceramics, Stone, And Refractory Products. | Brand | KEYING | Commodity Code | CGA1ST+Grit+C |
Compatible Tool | Flexible Shaft Drive Straight Grinder | Country Of Origin | China | Raw Material | Black Silicon Carbide |
Hardness | Very Hard Hard Medium Soft Very Soft Extremely Soft | For Use On | Carbon Steel, General Alloy Steel, Calcined Cast Iron, Hard Bronze | Grit Size | 46#, 60#, 80#, 100#,120# |
Shank Diameter | 5/64", 1/8", 5/32", 3/16", 1/4", 9/32", 5/16", 3/8", 15/22", 9/16", 19/32", 5/8", 23/32", 3/4", 25/32", 13/16", 1", 1-3/16", 1-1/4", 1-1/2" | Industries | High-Speed Railway, Aviation, Metal Casting And Other High Precision Industries | Colour | Grey Black |
Maximum RPM | 4800-477500 | Shape | CL-Cylinder TT-Triangular Trapezoid PE-Peach C-Triangle Cone BS-Conical with Radius end RO-Ball LP-Lengthen Peach Tip LB-Lengthen Bullet Shape T-T-Shape SS-Dish BW-Cup(Bowl) RC-Cylinder with Radius end PC-Pointed end cylinderM-Mushroom IT-Inverted Trapezoid TA1-Triangular Trapezoid | Standard Pack Quantity | 5pcs/10pcs |
Black Silicon Carbide has high hardness, good self-sharpening
Not easy to burn the surface of the workpiece
Mostly used for cutting and grinding materials with low tensile strength.
Used in non-ferrous metal materials (copper, aluminum)
Gray cast iron workpiece
Glass
Ceramics
Stone
Refractory products.
Flexible shaft drive
Straight grinder
Please try to choose operation indoors environment and wear protective guards and goggles.
Never to exceed the recommanded maximum permitted rotational speed for safety reasons.
In order to have a gppd syocl removal rate, quality of surface and thermal laoding on the workpiece, the best performace would with a recomended cutting speed at 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.
The clamping lenght between shank and grinders should be more than 15mm.
Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.
Keying Abrasives in 2023 Zhengzhou International A&G EXPO
Find more
Keying Abrasive Flap Wheel Warranty and Guarantee
Find more
Scope Industry Application of Keying Abrasives Flap Wheel
Find more
Find more