CLOSE

Search
×

Full Non-woven Flap Disc 4-1/2inch

Silicon Carbide Non-woven Abrasive cloth Flap Disc 1
Silicon Carbide Non-woven Abrasive cloth Flap Disc 2
Silicon Carbide Non-woven Abrasive cloth Flap Disc 3
Silicon Carbide Non-woven Abrasive cloth Flap Disc 4
Silicon Carbide Non-woven Abrasive cloth Flap Disc 5
Silicon Carbide Non-woven Abrasive cloth Flap Disc 6

Table of Full Non-woven Flap Disc 4-1/2inch

Table of Full Non-woven Flap Disc 4-1/2inch


Full Non-woven Flap Disc 4-1/2inch Non-woven Flap Disc (Full) Size Table

Full Non-woven Flap Disc 4-1/2inch Non-woven Flap Disc (Full) Size Table


Full Non-woven Flap Disc 4-1/2inch Specification:

  • Diameter: 4-1/2 inch=115mm

  • Max. RPM: 13300 RPM

  • Raw Materials: Aluminum Oxide(AO), Silicon Carbide(SC)

  • Grit Size: Coarse-60#/80#, Medium-100#/120#, Fine-150#/180#, Very Fine-240#/320#, Ultra Fine-400#/600#, Micro Fine-800#/1000#

  • Shank Diameter: 3mm, 6mm, 3.175mm, 6.35mm (Other sizes can be customized)


Full Non-woven Flap Disc 4-1/2inch Materials that can be worked:

  • Aluminum

  • Cobalt-based alloys

  • Other non-ferrous metals

  • High-temperature-resistant materials

  • Nickel-based alloys (e. g. Inconel and Hastelloy)

  • Bronze

  • Hard non-ferrous metal

  • Titanium

  • Titanium alloys

  • Copper

  • Soft non-ferrous metal

  • Brass

  • Zinc

  • Stainless steel (INOX)

  • Thermoplastics

  • Fiber-reinforced duroplastics (GRP, CRP)

  • Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)

  • Steel, cast steel

Full Non-woven Flap Disc 4-1/2inch Applicable Industries

Applications

  • Roughening

  • Deburring

  • Surface work

  • Cleaning

  • Structuring (matt finishing, brush matting, and satin finishing)

  • Fine grinding in multiple steps

Full Non-woven Flap Disc 4-1/2inch Applicable Industries

Safety Warning of Full Non-woven Flap Disc 4-1/2inch

Instructions: 

Safety Warning of Full Non-woven Flap Disc 4-1/2inch


Safety Warning:

The clamping length between shank and grinders should be more than 15mm. 

Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use. 

If you have any questions, please contact us immediately
Contact Keying Abrasives Now
Other Non-woven Flap Disc (Full) Products
Full Non-woven Flap Disc 6inch
Full Non-woven Flap Disc 6inch
Full Non-woven Flap Disc 4inch
Full Non-woven Flap Disc 4inch
Aluminum Oxide Full Non-woven Flap Disc (AO)
Aluminum Oxide Full Non-woven Flap Disc (AO)
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Visit our cookie policy to learn more.
Reject Accept