You are in our Global Site
KEYING Quick Change Discs are designed for use on pneumatic and electric die grinders. The Quick Change Discs allow a fast and safe too change.We are manufacturing SCM discs, our production is about reprocessing jumbo rolls of SCM, then finally changing into unique smaller sizes SCM grinding and polishing tools. They are adaptable to contours; the performance capacity is good and steady.
Suitable For Universal Work On Metal Surfaces In Stationary Applications, E.G. Removal Of Rough
Grinding Traces, Removal Of Oxidation And Light Deburring Work.
Achieve Matt And Satin-Finished Surfaces.
|Compatible Tool||Angle Grinders|
Mini Angle Grinder
|Country Of Origin||China||Grit Type||Aluminium Oxide|
|Backing||Nonwoven||For Use On|
High Alloyed Steel
Stainless Steel (Inox)
Stainless Steel (Inox)
|Grade||Extra Coarse A|
Very Fine A
Super Fine S
|Diameter Metric||1"/1.5"/2"/3"||Industries||Aerospace, General Industrial, Metalworking, Mro, Paint Preparation, Transportation & Heavy Equipment||Bonding||Resin Over Resin|
|Maximum RPM||5000-19000||Colour||Dark Brown/Brown/Maroon/Blue/Light Blue||Standard Pack Quantity||25pcs/50pcs/100pcs|
Excellent and consistent finish over a long period of time
Suitable for general use in dry and wet sanding applications
More durable so more resistant on edges
Much less smearing tendency than existing products; especially at the edge of the disc when working at tight angle
"Secure Hook & Loop fastening system
Reduce stages of operation
Resistant to water, oil"
Please try to choose operation indoors environment and wear protective guards and goggles.
Never to exceed the recommanded maximum permitted rotational speed for safety reasons.
In order to have a gppd syocl removal rate, quality of surface and thermal laoding on the workpiece, the best performace would with a recomended cutting speed at 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.
The clamping lenght between shank and grinders should be more than 15mm.
Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.
Revolutionizing Metal Work: Flap Disc Polishing Techniques Unveiled
Flap Disc Polishing Unleashed: Transforming Metal Surfaces in Automotive Restoration
Introduction to the Characteristics and Advantages of Non-woven Flap Wheel Drum