Name: 2 Inch Quick Change Paint & Striper
Brand: Wenling Keying Abrasives Co., Ltd.

2 Inch Quick Change Paint & Striper

The non-woven cleaning material of Quick Change Paint Striper 2 inches is glued onto a glass-fabric base. This makes KEYING 2 inch flap wheel suitable for use in face-down grinding. For coarse cleaning work such as removing paint, scale, heat discoloration, rust, and adhesive residues.

 Contact us

Call us +86(0)576-86711667

Specifications of 2" Quick Change Paint Striper

Size	2" (50mm)	Brand	Keying	Code	HMHM00250136+Grit+S HFSHFS100175+Grit+S
Backing	Roloc	Origin	Made In China	Grain Type	Aluminia Oxide/Silicon Carbide/Zirconia/Ceramic
Maximum RPM	3800	Minimium Order Quantity	10000pcs	Compatible Tool	Flexible Shaft Drives Straight Grinders Angle Grinders Cordless Angle Grinders
Hole Pattern	No Holes	Standard Of Packing	100pcs

Table of 2" Quick Change Paint Striper

Table of 2

Features of 2" Quick Change Paint Striper

High stock removal and low clogging
High competitive price
Quick tool changes and good abrasive performance
Long tools life

Safe and comfortable to use

2" Quick Change Paint Striper Applicable Industries

Heavy Duty Application

Roughing

Surface fabricating

Cleaning

Step-by-step fine grinding

Surface Can Be Used on

Mrtal

Wood

Paintwork

Plastic

Matching Tool Drivessanders

Sanders

Safety Instructions of 2" Quick Change Paint Striper

How To 2" Quick Change Paint Striper

Instructions:

Safety Instructions of 2" Quick Change Paint Striper

Please try to choose operation indoors environment and wear protective guards and goggles.
Never to exceed the recommanded maximum permitted rotational speed for safety reasons.
In order to have a gppd syocl removal rate, quality of surface and thermal laoding on the workpiece, the best performace would with a recomended cutting speed at 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.

Safety Warning:

The clamping lenght between shank and grinders should be more than 15mm.

Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.