You are in our Global Site
Strip wheel abrasive Drum 4-3/8 inch is the perfect choice for cleaning and stripping metal surfaces.Simply attach to your surface condition finisher and these wheels allow you to remove scaling, oxidation, or clean up weld lines. These strips material are extremely versatile and are specially designed to strip quickly with minimal under material loss.Each paint removal disc for angle grinder is made with premium(extra coarse) non-woven nylon strip.
Max. RPM: 4000 RPM
Outer Diameter: 110mm
Center Hole Diameter: 19mm keyhole
Raw Materials: Aluminum Oxide(AO)/Silicon Carbide (SC)
Please try to choose an operation indoor environment and wear protective guards and goggles.
Never exceed the recommended maximum permitted rotational speed for safety reasons.
In order to have a good stock removal rate, quality of surface, and thermal loading on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to different grit flap wheels.
The clamping length between shank and grinders should be more than 15mm.
Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.
Revolutionizing Metal Work: Flap Disc Polishing Techniques Unveiled
Flap Disc Polishing Unleashed: Transforming Metal Surfaces in Automotive Restoration
Introduction to the Characteristics and Advantages of Non-woven Flap Wheel Drum