CLOSE

Search
×

Silicon Carbide Paint Striper Disc With Shank (SC)

silicon carbide paint striper disc with shank sc

For general grinding of parts made of aluminum, copper, bronze, titanium and fiber reinforced plastics.

Especially recommended for titanium alloys.

It is very suitable for the aviation industry, especially silicon carbide is the only approved abrasive, such as engine components.

Silicon Carbide Paint Striper Disc with Shank (SC) Grit Size Table Corresponding To Raw Materials

grit-size-table-corresponding-to-raw-materials.png


Silicon Carbide Paint Striper Disc with Shank (SC) Paint Striper Disc with Shank Size Table

Silicon Carbide Paint Striper Disc with Shank (SC) Paint Striper Disc with Shank Size Table


Silicon Carbide Paint Striper Disc with Shank (SC) Specification:

  • Max. RPM: 7000~10000 RPM

  • Outer Diameter: 100mm/115mm/125mm/150mm/180mm

  • Center Hole Diameter: 16mm/22mm

  • Other Raw Materials: Aluminum Oxide(AO)


Silicon Carbide Paint Striper Disc with Shank (SC) Materials that can be worked:

  • Aluminum

  • Cobalt-based alloys

  • Other non-ferrous metals

  • High-temperature-resistant materials

  • Nickel-based alloys (e. g. Inconel and Hastelloy)

  • Bronze

  • Hard non-ferrous metal

  • Titanium

  • Titanium alloys

  • Copper

  • Soft non-ferrous metal

  • Brass

  • Zinc

  • Stainless steel (INOX)

  • Grey/nodular cast iron (GG/GJL, GGG/GJS)

  • Annealed cast iron

  • Thermoplastics

  • Elastomers

  • Fiber-reinforced duroplastics (GRP, CRP)

  • Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)

  • Steel, cast steel

Silicon Carbide Paint Striper Disc With Shank (SC) Applicable Industries

Applications

  • Surface work

  • Roughening

  • Cleaning

Silicon Carbide Paint Striper Disc With Shank (SC) Applicable Industries

Safety Warning of Silicon Carbide Paint Striper Disc With Shank (SC)

Instructions: 

safety-warning-of-silicon-carbide-paint-striper-disc-with-shank-(sc).png


Safety Warning:

The clamping length between shank and grinders should be more than 15mm. 

Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use. 

If you have any questions, please contact us immediately
Contact Keying Abrasives Now
Other Paint Striper Disc With Shank Products
Keying Paint Striper Disc With Shank
Keying Paint Striper Disc With Shank
Paint Striper Disc With Shank 1-3/16 Inch
Paint Striper Disc With Shank 1-3/16 Inch
Aluminium Oxide Paint Striper Disc With Shank (AO)
Aluminium Oxide Paint Striper Disc With Shank (AO)
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Visit our cookie policy to learn more.
Reject Accept