You are in our Global Site
KEYING Miniature Unmounted Flap Wheels are characterized by high elasticity, high performance, and strong grinding force. This kind of Unmounted Flap Wheel is made of Silicon Carbide. It is mainly used for processing Non-ferrous metals, plastics, and other materials. Its reactivity with these materials is very weak.
Silicon carbide is a very sharp edge, low toughness, and high hardness of synthetic abrasive particles.
Ideal for use in the aviation industry, especially as silicon carbide is the only approved abrasive, for example for engine parts.
It is often used to process hard alloy, titanium alloy, high-speed steel cutting tools, and other difficult grinding materials and to modify the grinding wheel.
·Aluminum Alloy Products
·Cast Iron, Etc
Manipulator And Other Tools
|Country Of Origin||China||Raw Material||Silicon Carbide|
|Inner Hole Size||3mm, 6mm, 3.175mm, 6.35mm, 8mm, 10mm||For Use On|
·Metal Surface Treatment
·Cleaning Welding Scar
·Painting Removingand Pre-Treatment.
|Grit Size||60#, 80#, 120#|
|Outside Diameter Range||8mm-55mm||Industries|
·Other Early And Fine Processing Industries
|Cloth Base||Domestic Abrasive Clothes|
lmported Abrasive Clothes
|Maximum RPM||15000-20000||Shape||Standard||Standard Pack Quantity||20pcs/40pcs/50pcs/80pcs/100pcs|
KEYING Unmounted Flap Wheel is widely used in the workpiece surface grinding and polishing processing. Silicon carbide hardness is second only to diamond, with strong wear-resisting performance, wear-resisting pipe, impeller, pump room, cyclone, bucket lining ideal material, its wear-resisting performance is cast iron, rubber service life of 5-20 times, is also one of the ideal materials for aviation runway.
It is mainly used for processing Fibre-reinforced plastics, thermoplastics, wood, chipboard, paintwork, Hard aluminum alloys, Bronze, titanium and other materials
Made of emery cloth and resin laminated, sand page layers arranged, grinding head grinding cutting sharp.
Adopt resin bonding, the blade will not fly when running at high speed, customers can feel at ease to use.
Sandpaper blades of different granularity grind out different product surface smoothness. The smaller the particle size, the more rough it is polished, the larger the particle size, the smoother it is polished.
The Airline industry
Matching tool drives
Manipulator and other tools
Soaked in hot water above 60 degrees for 2-3 minutes before use, so that the emery cloth is fully damp. In the process of grinding, the dust is not only small, the emery cloth will not produce the phenomenon of fragmentation, but also can improve the service life, thereby reducing the loss and reducing the cost. Pay attention to the positive and negative directions when clamping, idling for 1 minute before use.
Revolutionizing Metal Work: Flap Disc Polishing Techniques Unveiled
Flap Disc Polishing Unleashed: Transforming Metal Surfaces in Automotive Restoration
Introduction to the Characteristics and Advantages of Non-woven Flap Wheel Drum