You are in our Global Site



Three Common Automotive Polishing Methods Using Abrasive Materials

Dec 20-2017

The appearance of cars has brought great convenience to our lives. With the increase of cars, people have gradually developed in the areas of car modification and maintenance. In this hot summer, many car owners will polish and polish to prevent damage to the appearance of the car. This can make the car look neat and tidy, prevent rust, collisions, and more. Here are three common car grinding and polishing techniques:

Physical grinding

This type of abrasive is irregular diamond-shaped, with three grades of coarse, medium, and fine. The effect of oxidation and scratching is quite good, and it is the mainstream grinding and polishing technology on the market. However, the angular rough abrasives often cause secondary fine scratches, which requires more time than secondary grinding with finer abrasives. The program is complex and inevitably damages the paint surface. Frequent use of this grinding industrial abrasive products and technology makes the clear coat layer thinner and the original car paint brightness dim.

Physical + overlapping grinding

After just polishing, the coarse and medium scratches disappear, and there is a bright effect, but there are obvious fine scratches and spin properties in the sun. The reason is that some scratches are filled with oil-based components of wax or resin, rather than really removed; if it is too oily, the walk line of the grinding ball will produce spin properties. This polishing method is very easy to reproduce scratches after washing the car two or three times, and its deception is very strong. Shop owners and technicians who don't know what to do will be very distressed.

Top-level rare grinding technology

Delayed crushing and polishing technology, with round abrasives that will not cause secondary grinding scratches, low paint surface temperature; when the polishing ball rotates at high speed and the abrasive generates a certain temperature, the abrasive particles will shatter into finer particles instantaneously, effectively polishing fine and deep layers, the polishing technology can ensure the effect and prevent damage to the paint surface to the greatest extent (polishing must have damage). At the same time, this type of abrasives for sale does not contain wax or resin oil-based components, and the gloss thrown out is the deep original paint gloss of the paint surface, and today's cold light texture is amazing.

In the case of completely removing scratches and oxidation layers, try to minimize damage to the paint surface. For example, according to the specific situation of the paint surface, choose the appropriate particle size of abrasive, and try to use sandpaper locally. Not only should we pursue the surface effect after construction, but also prevent the use of products with oil-based cover-up functions such as wax or resin.

After reading the above article, do you have a deeper understanding of car polishing and grinding? Our abrasives supplier hopes it is helpful to you. If you plan to shine your car, you must choose the method that suits your car the best. Do not greedily seek small benefits, choose some formal maintenance shops for maintenance, which can improve the compliance of the car and prevent any accidents.

Featured Keying Abrasive Products

Other Keying Abrasives News
Oil Stone
Contact Us




Code Scanning Attention



Code Scanning Attention

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Visit our cookie policy to learn more.
Reject Accept